Haltech E8 - Manual (Page 74)

Haltech E11/E8 Instruction Manual
• VANOS Ref Signal - For control of BMWs VANOS system two signal inputs are required. The
VANOS ref signal reads the fixed 8 pulse signal on the camshaft.
• VANOS Inlet Cam Signal - the VANOS Inlet Cam digital timed input can be connected to read the
variable (moving) 8 pulse signal on the camshaft of a VANOS equipt engine.
• Intercooler Spray Input – When using intercooler spray advanced this input is required to be
enabled before the intercooler spray will activate.
Data Logging - See Datlogging section for Details.
Page: 74 Copyright © Haltech 2008