Haltech F9A - Manual (Page 26)

25
Switch 1 2 3 4 5
Category
A OFF ON ON ON OFF
Category B OFF OFF ON OFF ON
Category C OFF OFF OFF ON ON
Category D ON OFF OFF ON ON
1.3.11 Route Optional Auxiliary Loom
The auxiliary loom may be routed in a similar manner to that of the main loom. Refer to the
F9A Supplementary Manual for installation details.
1.3.12 Connect the ECU
The ECU can now be connected and tested. Be sure to engage the clip on the main connector.
This will make sure the main connector parts mate correctly and reduces the mechanical
strain on the connector bodies. The system can now be tested as described in the following
chapters.