Heli-Max HMXE7459 - Manual (Page 4)

parallel to the fl ybar, which is 0 degrees collective pitch. If the blades
are not 0 degrees, then adjust the top linkage until they are. The
linkages on each blade grip must be the same length.
❏
2. Raise the throttle to the uppermost position and you should
have 10° of top end pitch.
❏
3. Lower the collective stick to the bottom position. You should
have -10° of pitch.
❏
4. Unplug the fl ight battery, turn the Idle Up switch off, and
remove the fl ight battery. Plug the tail motor and main motor back
into the respective plugs.
The Axe CP is now ready to fl y. Perform the tracking test as
mentioned in the AXE CP instruction manual and if an adjustment
is needed use the linkage shown above.
Please Note: The Axe CP with the new Bell Hiller Head will be
much more responsive to your inputs in comparison to the original
Axe CP Head. Please take your time and become accustomed to
the new feel before you progress into forward fl ight or aerobatics.
Happy Flying!
HMXE7459INST1