Heli-Max HMXM1015 - Manual (Page 6)

6
7
Check the mechanical limits by moving the rudder
stick all the way to the right and then all the way
to the left. Adjust end points (left and right) using
your transmitter’s…
ATL (Adjustable Travel Limit)
or
ATV (Adjustable Travel Volume)
or
EPA (End Point Adjustment)
Make sure the servo does not bind (over throw)
the pitch slider at the extents of the movement.
If you have the ball link the correct distance
from the center of the servo output shaft, the
pitch slider should just touch the extents of the
movement with the transmitter’s EPA at 100%
left and 100% right.
Unplug the main power battery from the controller
and turn off the radio. Unplug the rudder servo
from the receiver.
Gyro Installation
1
To install the Gyro select an open area on the
helicopter away from the motor and motor
controller. Your installation position should be
with the gyro in-line with the main shaft. Typically,
most gyros are installed on the frame set over the
tail boom mounting area.