Heli-Max HMXE09 - Manual (Page 3)

5) I will not fl y my model unless it is identifi ed with my name
and address or AMA number, on or in the model. Note: This
does not apply to models while being fl own indoors.
7) I will not operate models with pyrotechnics (any device
that explodes, burns, or propels a projectile of any kind).
RADIO CONTROL
1) I will have completed a successful radio equipment ground
check before the fi rst fl ight of a new or repaired model.
2) I will not fl y my model aircraft in the presence of spectators
until I become a qualifi ed fl ier, unless assisted by an
experienced helper.
3) At all fl ying sites a straight or curved line(s) must be
established in front of which all fl ying takes place with the
other side for spectators. Only personnel involved with fl ying
the aircraft are allowed at or in the front of the fl ight line.
Intentional fl ying behind the fl ight line is prohibited.
4) I will operate my model using only radio control frequencies
currently allowed by the Federal Communications Commission.
5) I will not knowingly operate my model within three
miles of any pre-existing fl ying site except in accordance
with the frequency sharing agreement listed (in the
complete AMA Safety Code).
9) Under no circumstances may a pilot or other person
touch a powered model in fl ight; nor should any part of the
model other than the landing gear, intentionally touch
the ground, except while landing.
SAFETY PRECAUTIONS
Failure to follow these safety precautions may result in
severe injury to yourself and others.
Keep your face and body as well as all spectators away
from the plane of rotation of the rotors whenever the battery
is connected.
Keep these items away from the rotors: loose clothing, shirt
sleeves, ties, scarfs, long hair or loose objects such as
pencils or screwdrivers that may fall out of shirt or jacket
pockets into the rotors.
The spinning blades of a model helicopter can cause serious
injury. When choosing a fl ying site for your AXE CX Micro, stay
clear of buildings, trees and power lines. AVOID fl ying in or
near crowded areas. DO NOT fl y close to people, children or
pets. Maintain a safe pilot-to-helicopter distance while fl ying.
1. Your AXE CX Micro should not be considered a toy, but
rather a sophisticated, working model that functions very
much like a full-size helicopter. Because of its performance
capabilities, the AXE CX Micro, if not assembled and
operated correctly, could possibly cause injury to yourself or
spectators and damage to property.
2. You must assemble the model according to the instructions.
Do not alter or modify the model, as doing so may result in an
unsafe or unfl yable model. In a few cases the instructions may
differ slightly from the photos. In those instances the written
instructions should be considered as correct.
3. You must correctly install all R/C and other components
so that the model operates correctly on the ground and in
the air.
4. You must check the operation of the model before every
fl ight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
linkages or other connectors often and replace them if they
show any signs of wear or fatigue.
5. If you are not an experienced pilot or have not fl own
this type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for
your fi rst fl ights. If you’re not a member of a club, your local
hobby shop has information about clubs in your area whose
membership includes experienced pilots.
We, as the manufacturer, provide you with a top quality,
thoroughly tested helicopter and instructions, but
ultimately the quality and fl yability of your fi nished model
depends on how you build it; therefore, we cannot in any
way guarantee the performance of your completed model,
and no representations are expressed or implied as to the
performance or safety of your completed model.
Remember: Take your time and follow the instructions to
build a safe and enjoyable model.
ADDITIONAL ITEMS REQUIRED
❏
(8) AA Alkaline cells (SANP3500 AA 4-pack x2)
WARRANTY
Heli-Max ™ guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by
use or modifi cation. In no case shall Heli-Max’s liability
exceed the original cost of the purchased kit. Further,
Heli-Max reserves the right to change or modify this warranty
without notice.
3