Heli-Max HMXE0210 User Manual
Page 8
Advertising
❏
3. Cut the window out of the canopy, and trim the flashing
from around the rear opening.
❏
4. Cut the clear shield out along the molded-in cut lines.
❏
5. Secure the shield to the canopy with the two small
screws packaged with the shield.
❏
6. Install the canopy onto the helicopter.
❏
7. Apply decals as desired.
8
Advertising
See also other documents in the category Heli-Max Air equipment:
- HMXE0830 (20 pages)
- HMXE0834 (16 pages)
- HMXE0834 Maintenance Guide (4 pages)
- HMXE0836 (20 pages)
- HMXE0846 (20 pages)
- HMXE0824 (28 pages)
- HMXE7459 (4 pages)
- HMXE0838 (20 pages)
- HMXR4855 (1 page)
- HMXE7453 (2 pages)
- HMXR4854 (8 pages)
- HMXM1015 (15 pages)
- HMXM1015 (2 pages)
- HMXJ2025 (16 pages)
- HMXE0813 (16 pages)
- HMXE1008 (2 pages)
- HMXE0820 (24 pages)
- HMXE0815 (16 pages)
- HMXE0800 (20 pages)
- HMXE0801 (4 pages)
- HMXE06 (20 pages)
- HMXE0810 (36 pages)
- HMXE04 (2 pages)
- HMXE9584 (1 page)
- HMXE04 Addendum (2 pages)
- HMXE06 Addendum (2 pages)
- HMXE07 (24 pages)
- HMXE09 (12 pages)
- HMXE13 Manual (28 pages)
- HMXE13 Quick Start (2 pages)
- HMXE05 (12 pages)
- HMXE14 Manual (20 pages)
- HMXE14 Quick Start (2 pages)
- HMXM1012 (2 pages)
- HMXP2000 (1 page)
- HMXE4105 (1 page)
- HMXE0250 (44 pages)
- HMXM1010 (2 pages)
- HMXM1011 (2 pages)
- HMXE0200 (20 pages)
- HMXE0205 (20 pages)
- HMXE0806 (40 pages)
- HMXE0806 Addendum (4 pages)
- HMXE0807 (32 pages)