Engine start/stop button, P117), Changing the power mode – HONDA 2015 Fit - Owner's Manual User Manual

Page 118

Advertising
background image

117

uu

Operating the Switches Around the Steering Wheel

u

ENGINE START/STOP Button

Continued

Co
ntrols

ENGINE START/STOP Button

*1 : Except U.S. models with automatic transmission (CVT)

Changing the Power Mode

Models with smart entry system

1

ENGINE START/STOP Button

ENGINE START/STOP Button Operating Range

You can start the engine when the smart entry
remote is inside the vehicle.The engine may also run
if the smart entry remote is close to the door or
window, even if it is outside the vehicle.

ON mode:
Indicator in the button is off, if the engine is running.

If the smart entry remote battery is weak, beeper
sounds and the

message appears in the

information display.

2 If the Smart Entry Remote Battery is Weak

P. 412

Do not leave the power mode in ACCESSORY or ON
when you get out.

If the power mode does not change from VEHICLE
OFF to ACCESSORY, press the ENGINE START/STOP
button while moving the steering wheel left and
right. The steering wheel will unlock, allowing the
mode to change.

Operating Range

Except U.S. models with automatic transmission (CVT)

ACCESSORY
Indicator in the button is on.
Indicator in the button blinks
(from ON to ACCESSORY).
Operate the audio system and
other accessories in this position.

Automatic Transmission (CVT)

Manual Transmission

VEHICLE OFF (LOCK)
Indicator in the button is off.
The steering wheel is locked.

*1

The power to all electrical
components is turned off.

ON
Indicator in the button is on.
All electrical components can
be used.

Press the button without the shift lever in

(

P.

Shift to

(

P then press the button.

Press the button.

Without depressing
the brake pedal

Without depressing
the clutch pedal

Indicator

Indicator

Shift to

(

P.

U.S. models

15 US FIT-31T5A6000.book 117 ページ 2014年3月6日 木曜日 午後7時5分

Advertising