HONDA 2015 Fit - Owner's Manual - Manual (Page 380)

379
uu Replacing Light Bulbs u Rear License Plate Light Bulbs
Main
tenan
ce
Rear License Plate Light Bulbs
When replacing, use the following bulb.
1. Push the lens on the left and pull out the
lens and the socket attached to it.
2. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket.
3. Remove the old bulb and insert a new bulb.
Rear License Plate Light: 5 W
Lens
Bulb
15 US FIT-31T5A6000.book 379 ページ ２０１４年３月６日 木曜日 午後７時５分