HONDA 2015 Fit - Owner's Manual - Manual (Page 376)

375
uu Replacing Light Bulbs u Side Marker Light Bulbs
Continued
Main
tenan
ce
Side Marker Light Bulbs
When replacing, use the following bulbs.
1. Turn the socket to the left and remove it.
2. Remove the old bulb and insert a new bulb.
Fog Light Bulbs *
When replacing, use the following bulbs.
1. Loosen the screw using a Phillips-head
screwdriver.
2. Remove the screw, then push up the under
cover.
Side Marker Light: 3CP
Bulb
Socket
Fog Light: 35W (H8 LL for halogen bulb type)
1 Fog Light Bulbs *
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alcohol and a clean cloth.
Cover
Screw
* Not available on all models
15 US FIT-31T5A6000.book 375 ページ ２０１４年３月６日 木曜日 午後７時５分