HONDA 2015 Fit - Owner's Manual User Manual

Page 77

Advertising
background image

76

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Low Tire Pressure/
TPMS Indicator

Comes on for a few seconds when you
turn the ignition switch to ON

(

w

*1

, then

goes off.

May come on briefly if the ignition switch
is turned to ON

(

w

*1

and the vehicle is

not moved within 45 seconds, to indicate
the calibration process is not yet
complete.

Comes on and stays on when:
- One or more tires’ pressures are

determined to be significantly low.

- The system has not been calibrated.

Comes on while driving - Stop in a safe place,
check tire pressures, and inflate the tire(s) if
necessary.

Stays on after the tires are inflated to the
recommended pressures
- The system needs to be
calibrated.

2 TPMS Calibration P. 336

Blinks for about one minute, and then
stays on if there is a problem with the
TPMS, or when a compact spare tire is
temporarily installed.

Blinks and remains on - Have your vehicle
checked by a dealer. If the vehicle is fitted with a
compact spare, get your regular tire repaired or
replaced and put back on your vehicle as soon as
you can.

Smart Entry System
Indicator

*

Comes on for a few seconds when you
change the power mode to ON.

Comes on as soon as a problem is
detected in the smart entry system or
push button starting system.

Stays on constantly or does not come on at all
- Have your vehicle checked by a dealer.

U.S.
models
only

* Not available on all models

15 US FIT-31T5A6000.book 76 ページ 2014年3月6日 木曜日 午後7時5分

Advertising