HONDA 2015 Odyssey - Owner's Manual - Manual (Page 157)

uu Operating the Switches Around the Steering Wheel u Driving Position Memory System *
156
Co
ntrols
1. Adjust the driver’s seat and the door mirrors
to the desired position, and set the power
mode to ON.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press and hold memory button ( 1 or ( 2
within five seconds of pressing the SET
button.
u Once the seat and the outside mirrors
position has been memorized, the
indicator light on the button you pressed
stays on.
1. Move the shift lever to ( P .
2. Apply the parking brake.
3. Press a memory button (
( 1 or ( 2 ).
u You will hear the beeper, and the
indicator light will blink.
The seat and the door mirrors will
automatically move to the memorized
position. When it has finished moving, you
will hear the beeper, and the indicator light
stays on.
■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You readjust the door mirrors.
• You set the power mode to any position except
ON.
Memory
Button 1
Memory
Button 2
SET Button
■ Recalling the Stored Position 1 Recalling the Stored Position
The seat and the door mirrors will stop moving if you:
• Press the SET button, or a memory button ( ( 1 or
( 2).
• Adjust the seat position.
• Adjust the door mirrors.
• Shift into any position except ( P.
Memory
Button 1
Memory
Button 2
SET Button
15 US ODYSSEY-31TK86400.book 156 ページ ２０１４年７月１日 火曜日 午後２時４分