Replacing light bulbs p. 475, P475), Replacing light bulbs – HONDA 2015 Odyssey - Owner's Manual User Manual
Page 476: Headlight bulbs
475
Continued
Main
tenan
ce
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1. Remove the clips using a flat-tip
screwdriver, then remove the upper part of
the air intake duct.
High beam headlight: 60 W (HB3 for halogen bulb type)
Low beam headlight: 55 W (H11 for halogen bulb type)
*
Low beam headlight: 35 W (D2S for high voltage discharge type)
*
■
High Beam Headlight
1
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the cargo area or tow a trailer, have
the aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Clip
Driver side
* Not available on all models
15 US ODYSSEY-31TK86400.book 475 ページ 2014年7月1日 火曜日 午後2時4分