Blind spot information (bsi) system, Parking sensor system – HONDA 2014 Odyssey (Touring and Touring Elite) - Technology Reference Guide User Manual

Page 12

Advertising
background image

20

How It Works

BLIND SPOT INFORMATION (BSI) SYSTEM

Assists you in determining if there are detected vehicles in your blind spots. Available on

Touring Elite.

A radar sensor on each corner of the rear bumper alerts you when it detects a vehicle

in your left or right blind spots. Minimum operating speed is 20 mph.

When a vehicle is detected in your

blind spot, the blind spot indicator turns

on and stays lit until the area is clear.

When your turn signal is on and a

vehicle is detected, the blind spot

indicator blinks and a beep sounds until

the area is clear or the turn signal is off.

Left BSI indicator shown

21

PARKING SENSOR SYSTEM

Warns you of the proximity between your vehicle and nearby surrounding objects

when parking or backing up.

How It Works

Turning the System On and Off

Corner sensors

Rear center sensors

Within about 2 ft.

Within about 3.5 ft.

When the system senses an object, an indicator appears on the MID and center display

screen and a beep sounds. As you get closer to the object, the beep rate increases.

Press the parking sensor

button. A light appears

when the system is on.

Changing Settings

Determine the warning type, or turn the system off.

1. Press SETTINGS. Use the interface

dial to make and enter selections.

2. Select Vehicle Settings.

3. Select Driver Assist System Setup.

4. Select Blind Spot Info.

5. Select an alert type, or turn the

system off.

6. Press BACK to exit the menu.

14 Odyssey TRG_TOURING_ATG_NEW STYLE 4/25/2013 2:37 PM Page 12

Advertising