Hondavac, One-touch turn signal, Auto headlights with wiper integration – HONDA 2014 Odyssey (Touring and Touring Elite) - Technology Reference Guide User Manual

Page 9

Advertising
background image

15

14

HONDAVAC™

Clean up dry spills and debris inside your vehicle with the in-car vacuum system.

Available on Touring Elite.

How It Works

1. Make sure the vehicle is in Park (P). Set the power mode to Accessory, or start

the engine.

2. Open the vacuum storage lid in the driver’s side rear cargo area.

3. Pull out the vacuum hose, and install one of the attachments if desired.

4. Press the power button and begin to vacuum (dry use only).

Make sure you are using the vacuum in a well ventilated, open area to

minimize the likelihood of carbon monoxide exposure.

See your Owner’s Manual for instructions on canister or bag removal.

Accessory mode operation
• After 7 minutes, an intermittent beep begins to sound as a time limit alert.
• After 8 minutes, a beep sounds, PWR SAVE comes on, and the vacuum turns

off. You must start the engine if you want to continue using the vacuum. The

vacuum will restart after the engine has been running for about one minute.

Engine on operation

hose

attachments

power button

hose

attachments

power button

How It Works

ONE-TOUCH TURN SIGNAL

Use this quick and convenient method to signal a lane change.

• Lightly push the turn signal

lever up or down for a three-

blink sequence.

• For a continuous signal, push

the lever up or down until it

locks into place.

AUTO HEADLIGHTS WITH WIPER INTEGRATION

For your convenience, your vehicle’s headlights automatically turn on when you activate

the windshield wipers.

How It Works

Make sure your headlights are in

the AUTO position.

Turn on your windshield wipers.

The headlights also turn on.

When you turn off the windshield

wipers, the headlights turn off

shortly after.

14 Odyssey TRG_TOURING_ATG_NEW STYLE 4/25/2013 2:37 PM Page 9

Advertising