HONDA 2014 Pilot - Owner's Manual - Manual (Page 134)

133
uu Operating the Switches Around the Steering Wheel u Driving Position Memory System *
Co
ntrols
1. Turn the ignition switch to ON ( w . Adjust
the driver’s seat and the door mirrors to the
desired position.
2. Press the SET button.
u You will hear a beep, and the memory
button indicator light will blink.
3. Press and hold memory button ( 1 or ( 2
within five seconds of pressing the SET
button.
u Once the seat and the door mirror
positions have been memorized, the
indicator light on the button you pressed
stays on.
1. Move the shift lever to ( P .
2. Apply the parking brake.
3. Press a memory button (
( 1 or ( 2 ).
u You will hear a beep, and the indicator
light will blink.
The seat and the door mirrors will
automatically move to the memorized
positions. When they have finished moving,
you will hear a beep, and the indicator light
stays on.
■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You readjust the door mirrors.
• You turn the ignition switch to any position except
ON
( w .
Memory Button 1
Memory Button 2
SET Button
■
Recalling the Stored Position 1 Recalling the Stored Position
The seat and the door mirrors will stop moving if you:
• Press the SET button, or a memory button ( ( 1 or
( 2 ).
• Adjust the seat position.
• Adjust the door mirrors.
• Shift into any position except ( P .
Memory Button 1
Memory Button 2
SET Button