Trip meter, Outside temperature – HONDA 2014 Pilot - Owner's Manual User Manual
Page 88
Continued
87
uu
Gauges and Displays
u
Multi-Information Display
*
In
strum
e
nt Pa
nel
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip
meter is reset to 0.0.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect.
■
Trip Meter
■
Outside Temperature
1
Switch between trip meter A and trip meter B by
pressing the SEL/RESET button.
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the multi-information display’s customized
features to correct the temperature.