HONDA 2014 Pilot - Owner's Manual - Manual (Page 438)

437
uu If a Tire Goes Flat u Changing a Flat Tire
Continued

Han
d
lin
g the U
n
expected
5. Put the extension bar with the wheel nut
wrench on the hoist shaft.
Turn the wrench to the left to lower the
spare tire to the ground.
6. Keep turning the wheel nut wrench to
create slack in the cable.
7. Remove the bracket from the spare tire.
8. Place a wheel block or rock in front and
rear of the wheel diagonal to the flat tire.
Wheel Nut
Wrench
Extension Bar
Bracket
Wheel
Blocks
The tire to be replaced.