HONDA 2014 Pilot - Owner's Manual - Manual (Page 410)

409
uu Replacing Light Bulbs u High-Mount Brake Light Bulb
Main
tenan
ce
High-Mount Brake Light Bulb
When replacing, use the following bulb.
1. Remove the lens segment by prying on the
edge using a flat-tip screwdriver.
u Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
2. Remove the screw under each lens.
3. Pull the high-mount brake light assembly
out of the vehicle.
4. Remove the two mounting screws from the
light assembly.
5. Remove the lens from the light assembly.
6. Remove the old bulb and insert a new bulb.
High-Mount Brake Light: 5 W
Screw
Lens Segment
Bulb