HONDA 2013 Crosstour - Owner's Manual - Manual (Page 122)

uu Operating the Switches Around the Steering Wheel u Light Switches
120
Co
ntrols
Automatic lighting control can be used when
the ignition switch is in ON
( w *1 .
When you turn the light switch to AUTO, the
headlights and other exterior lights will switch
on and off automatically depending on the
ambient brightness.
u You can change the auto light sensitivity
setting.
2 Customized Features * P. 281
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■ Automatic Lighting Control 1 Automatic Lighting Control
We recommend that you turn on the lights manually
when driving at night, in a dense fog, or in dark areas
such as long tunnels or parking facilities.
The light sensor is in the location shown below.
Do not cover this light sensor with anything;
otherwise, the automatic lighting system may not
work properly.
Adjust the auto light sensitivity as follows:
Setting The exterior lights come on
when the ambient light is at
MAX
HIGH
MID
LOW
MIN
Light Sensor
Models with audio/information screen
Bright
Dark
Models with audio/information screen
* Not available on all models
13 CROSSTOUR-31TP66300.book 120 ページ ２０１２年９月２７日 木曜日 午後３時２７分