HONDA 2013 Crosstour - Owner's Manual User Manual
Page 78
76
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
Forward
Collision
Warning
(FCW)
Indicator
*
●
Comes on for a few seconds
when you turn the ignition
switch to ON
(
w
*1
, then goes
off.
●
Comes on when you have
customized FCW to turn off.
●
Comes on if there is a problem
with the FCW system.
●
Stays on constantly without FCW off - Have the vehicle
checked by a dealer.
●
Blinks when the system detects
a likely collision with a vehicle
in front of you. The beeper
sounds.
●
Blinks while driving - Take appropriate action to prevent
a collision (apply the brakes, change lanes, etc.).
—
●
Comes on when the FCW
system shuts itself off.
●
Stays on - The temperature inside the FCW system is too
high. The system activates when the temperature inside the
system cools down.
2 Automatic shutoff P. 437
●
Stays on - The radar sensor or the area around the camera
is blocked by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
●
Have your vehicle checked by a dealer if:
The indicator and message come back on after you cleaned
the area around the camera.
2 Automatic shutoff P. 437
2 Automatic shutoff P. 437
—
* Not available on all models
13 CROSSTOUR-31TP66300.book 76 ページ ２０１２年９月２７日 木曜日 午後３時２７分