HONDA 2013 Crosstour - Owner's Manual - Manual (Page 489)

487
uu Replacing Light Bulbs u Fog Light Bulbs
Main
tenan
ce
1. Turn the steering wheel all the way to the
right.
2. Remove the holding clips and screw, and
pull the inner fender back.
3. Push the tab to remove the coupler.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the headlight
assembly and turn it to the right.
6. Insert the coupler into the connector of the
bulb.
1 Fog Light Bulbs
Remove the clip by using a flat-tip screwdriver.
2 Low Beam Headlights P. 485
Holding Clip
Screw
Driver side
Bulb
Coupler
Tab
13 CROSSTOUR-31TP66300.book 487 ページ ２０１２年９月２７日 木曜日 午後３時２７分