Fog light bulbs – HONDA 2013 Crosstour - Owner's Manual User Manual
Page 488
486
uu
Replacing Light Bulbs
u
Fog Light Bulbs
Main
tenan
ce
Fog Light Bulbs
When replacing, use the following bulbs.
1. Remove the holding clips, then push up the
under cover.
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert a new bulb into the fog light
assembly and turn it to the right.
5. Insert the coupler into the connector of the
bulb.
Fog Light: 55 W (H11 for halogen bulb type)
1
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alcohol and a clean cloth.
Remove the clip by using a flat-tip screwdriver.
2 Low Beam Headlights P. 485
Holding Clips
Under Cover
Passenger side
Tab
Coupler
Bulb
13 CROSSTOUR-31TP66300.book 486 ページ 2012年9月27日 木曜日 午後3時27分