HONDA 2012 Crosstour - Owner's Manual - Manual (Page 145)

The scan function samples all
stations with strong signals on the
selected RDS category. To activate it,
press and release the SCAN button.
You will see SCAN in the display.
The system will scan for a station
with a strong signal in the selected
RDS category. You will also see the
selected RDS category name
blinking while searching it. When it
finds a strong signal, it will stop and
play that station for about 10 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
You can use the RDS program
search or scan function even if the
RDS information display
function is off.
Press the MENU button to display
the sound settings. Turn the selector
knob to select an appropriate setting:
bass, treble, fader, balance, SUBW
(subwoofer) and SVC (speed-
sensitive volume compensation).
Press the selector knob (ENTER) to
enter the setting, then turn the
selector knob to adjust the setting.
If the system does not find a station,
‘‘NOTHING’’ blinks for about five
seconds, then the system goes back
to the last selected station.
CONTINUED
Adjusting the Sound
Playing the FM/AM Radio (Models without navigation system)
RDS Program SCAN
141
Selector knob adjustable
direction is shown.
FADER is selectable.
Fe
a
tu
re
s
2012 Crosstour