HONDA 2012 Crosstour - Owner's Manual - Manual (Page 349)

Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Turn on the headlights to test the
new bulb.
Reinstall the engine coolant
reserve tank. Push the electrical connector onto
the bulb.
Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
3.
2.
4.
5.
6.
CONTINUED
Passenger’s side
Lights
345
TAB ELECTRICAL CONNECTOR
BULB
Ma
int
e
na
nce
2012 Crosstour