Remote transmitter, 2012 crosstour – HONDA 2012 Crosstour - Owner's Manual User Manual
Page 93
Advertising
To replace the battery:
Remove the screw at the base of
the transmitter with a small
Phillips-head screwdriver.
Separate the transmitter by prying
its middle seam with your
fingernail.
Be careful when removing
this screw as the head of the screw
can strip out.
Inside the transmitter, separate
the inner cover from the keypad
by carefully prying on the edge
with a coin.
Remove the old battery, and insert
a new battery into the back of the
cover with the
side facing down.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations
for battery disposal.
Install the parts in reverse order.
1.
2.
3.
4.
5.
CONTINUED
Remote Transmitter
89
NOTE:
SCREW
COIN
BATTERY
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
2012 Crosstour
Advertising