HONDA 2012 Crosstour - Owner's Manual - Manual (Page 50)

A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
For the center seat, lower the
head restraint, then route the
tether strap over the head
restraint and seat-back.
Tighten the strap according to the
seat maker’s instructions.
Open the anchor cover, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
After properly securing the child
seat (see page
), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
1.
2.
3.
44
Installing a Child Seat
Installing a Child Seat
Using an Anchor
46
TETHER STRAP HOOK Center Position ANCHOR
ANCHOR COVER Outer Position
TETHER STRAP HOOK
ANCHOR COVER ANCHOR
TETHER ANCHORAGE POINTS
Dr
iv
er
and
P
asseng
er
Saf
e
ty
with a Tether
2012 Crosstour