HONDA 2008 Ridgeline - Owner's Manual - Manual (Page 230)

The 7-pin trailer connector is needed
for the trailer lights. To connect the
connector, do this:
Make sure the connector and the
socket are free of dirt, moisture,
or other foreign material.
Open the socket lid by pulling it up.
Insert the connector securely into
the socket.
Hook the retaining tab on the
inner side of the lid against the
retaining tab of the connector to
prevent disconnection during
operation.
Remove the socket cover, and
attach it securely over the socket.
Insert the connector into the
socket securely to prevent
disconnection during operation.
The 4-pin trailer connector is also
needed for the trailer lights. To
connect the connector, do this:
1. 1.
2.
3.
4.
2.
Connecting the Trailer Connectors
Towing a Trailer
226
7-PIN TRAILER CONNECTOR
SOCKET
RETAINING
TAB
RETAINING
TAB
LID
4-PIN TRAILER CONNECTOR
SOCKET
COVER
7-PIN TRAILER
CONNECTOR
4-PIN TRAILER
CONNECTOR
2008 Ridgeline
Table Of Contents Main Menu