HONDA 2008 Ridgeline - Owner's Manual - Manual (Page 266)

Remove the mounting screw from
the bed light assembly.
Pull out the light assembly.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Push the socket into the light
assembly, and turn it clockwise
until it locks.
Turn on the lights to make sure
the new bulb is working.
Reinstall the light assembly.
Reinstall the mounting screw, and
tighten it securely.
1.
2.
3.
4.
5.
6.
7.
8.
Lights
Replacing a Bed Light Bulb
262
2008 Ridgeline
Table Of Contents Main Menu