HONDA 2008 Ridgeline - Owner's Manual - Manual (Page 92)

Push and hold the rear of the
master door lock switch on the
driver’s door. You will hear a click.
Continue to hold down the switch:
Or, until you hear two more
clicks (after about 10 seconds)
to activate the all doors unlock
feature.
Release the switch and, within 5
seconds, turn the ignition switch
to the LOCK (0) position.
Until you hear another click
(after about 5 seconds) to
activate the driver’s door unlock
feature.
Make sure the shift lever is in the
Park (P) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Make sure the shift lever is in the
Park (P) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
1.
2.
4.
3.
1.
2.
Unlocks the driver’s door or all doors
when the shift lever is moved into the
Park (P) position.
Unlocks the driver’s door or all doors
when the ignition switch is moved out of
the ON (II) position.
Door Locks
To program the Park Unlock mode: To program the Ignition Switch
Unlock mode:
88
2008 Ridgeline
Table Of Contents Main Menu