Ac0707o00223a, Lights – HONDA 2007 Accord Sedan - Owner's Manual User Manual
Page 224
Advertising
Open the trunk.
Remove the trim clips from the
right or left corner of the trunk lid
trim by carefully prying them
using a small, flat-tip screwdriver
wrapped with tape.
Carefully bend back the corner of
the trunk lid trim to expose the
bulbs.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
Install a new bulb into the socket,
and reinstall the socket into the
light assembly.
Test the light.
Push the trunk lid trim back into
position.
Press the trim clips back into their
holes.
1.
3.
2.
4.
5.
6.
7.
8.
V6 models
Lights
Replacing Back-up Light Bulbs
Ma
int
e
na
nce
223
TRIM CLIPS
BULB
SOCKET
SOCKET
BULB
Main Menu
Table of Contents
s
t
Main Menu
▲
▼
Advertising