HONDA 2007 Accord Sedan - Owner's Manual - Manual (Page 66)

This meter shows the number of
miles (U.S.) or kilometers (Canada)
driven since you last reset it.
There are two trip meters: Trip A
and Trip B. Switch between these
displays and the odometer/outside
temperature display by pressing the
select/reset knob repeatedly. Each
trip meter works independently, so
you can keep track of two different
distances.
This shows the temperature of the
engine’s coolant. During normal
operation, the pointer should rise
from the bottom white mark to about
the middle of the gauge. In severe
driving conditions, such as very hot
weather or a long period of uphill
driving, the pointer may rise into the
upper half of the gauge. If it reaches
the red (Hot) mark, pull safely to the
side of the road. Turn to page
for
instructions and precautions on
checking the engine’s cooling
system.
If the outside temperature is
incorrectly displayed, you can adjust
it up to
5°F ( 3°C) warmer or
cooler.
NOTE: The temperature must be
stabilized before doing this
procedure.
Select the outside temperature
display, then
press the select/reset
knob for 10 seconds. The following
sequences appear, 1 second at a
time: 0, 1, 2, 3, 4, 5,
5, 4, 3, 2,
1, 0, 1 (0, 1, 2, 3, 3, 2, 1, 0, 1).
When the temperature reaches the
desired value, re
lease the select/
reset knob. You should see the new
outside temperature displayed.
In certain weather conditions,
temperature readings near freezing
(32°F, 0°C) could mean that ice is
forming on the road surface.
When you turn the ignition switch to
the ON (II) position, what you last
selected is displayed.
To reset a trip meter, display it, and
then press and
hold the select/reset
knob until the number resets to ‘‘0.0’’.
160
Trip Meter Temperature Gauge
Gauges
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
65
Main Menu Table of Contents s t Main Menu ▲ ▼ Table of Contents