Changing the oil and filter – HONDA 2007 Civic Coupe - Owner's Manual User Manual

Page 227

Advertising
background image

Open the hood, and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.

Always change the oil and filter
according to the maintenance
messages shown on the information
display. The oil and filter collect
contaminants that can damage your
engine if they are not removed
regularly.

Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lift for this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic.

Run the engine until it reaches
normal operating temperature,
then shut it off.

1.

2.

Changing the Oil and Filter

224

DRAIN BOLT

WASHER

DRAIN BOLT

WASHER

Si

DX, Canadian DX-G, LX, EX

Main Menu

Table of Contents

s

t

Main Menu

s

t

Main Menu

Main Menu

s

t

Main Menu

Table of Contents

Advertising