Instrument panel indicators – HONDA 2007 Civic Coupe - Owner's Manual User Manual

Page 64

Advertising
background image

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.

If it comes on and stays on at any
other time, or if it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. Take
your vehicle to a dealer to have it
checked. Without VSA, your vehicle
still has normal driving ability, but
will not have VSA traction and
stability enhancement. See page

for more information on the

VSA system.

This indicator shows you when the
engine speed is near the tachometer’s
red zone. When the engine speed
gets to near the red zone, the
indicator blinks. If you exceed the
maximum speed for the gear you are
in, the indicator stays on, and you
may feel the engine cut in and out
due to the engine speed limiter (see
page ).

To protect the engine from damage,
never drive with the tachometer in
its red zone.

This indicator has three functions:

It flashes when VSA is active (see
page ).

It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.

It comes on along with the VSA
system indicator if there is a
problem with the VSA system.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. See page

for more

information on the VSA system.

197

1.

2.

3.

206

206

206

Vehicle Stability Assist
(VSA) System Indicator

Rev Limit Indicator

VSA Activation Indicator

Instrument Panel Indicators

Si model only

Si model only

Si model only

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

61

REV LIMIT INDICATOR

Main Menu

Table of Contents

s

t

Main Menu

s

t

Main Menu

Main Menu

s

t

Main Menu

Table of Contents

Advertising