HONDA 2007 Civic Coupe - Owner's Manual - Manual (Page 260)

CONTINUED
Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving. Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
Lower the vehicle to the ground,
and remove the jack.
Do not attempt to forcibly pry the
wheel cover off with a screwdriver
or other tool. The wheel cover
cannot be removed without first
removing the wheel nuts.
11. 10.
12.
DX, Canadian DX-G and U.S. LX
models
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
257
WHEEL NUTS WHEEL COVER BRAKE HUB
WHEEL NUTS
Main Menu Table of Contents s t Main Menu s t Main Menu Main Menu s t Main Menu