Tires – HONDA 2007 Civic Coupe - Owner's Manual User Manual

Page 248

Advertising
background image

Your tires have wear indicators
molded into the tread. When the
tread wears down, you will see a
band 1/2 inch (12.7 mm) wide band
across the tread. This shows there is
less than 1/16 inch (1.6 mm) of tread
left on the tire.

A tire this worn gives very little
traction on wet roads. You should
replace the tire if you can see three
or more tread wear indicators.

The compact spare tire pressure is:

For convenience, the recommended
tire sizes and cold tire pressures are
on a label on the driver’s doorjamb.
For additional information about
your tires, see page

.

Every time you check inflation, you
should also examine the tires for
damage, foreign objects, and wear.

You should look for:

Bumps or bulges in the tread or
side of the tire. Replace the tire if
you find either of these conditions.

Cuts, splits, or cracks in the side
of the tire. Replace the tire if you
can see fabric or cord.

Excessive tread wear.

We strongly recommend that you do
not drive faster than the posted
speed limits and conditions allow. If
you ever drive in a sanctioned
competitive event at sustained high
speeds (over 118 mph or 190 km/h),
be sure to adjust the cold tire
pressures as shown below. If you do
not, excessive heat can build up and
cause sudden tire failure.

282

Front/Rear:

Tire Size

Cold Tire Pressure

Optional Summer for Si

Si model only

Si model only

Tires

High Speed Driving

Tire Inspection

Tire Size·Cold Tire Pressure f or
High Speed Driving

Ma

int
e

na
nce

245

INDICATOR LOCATION MARKS

TREAD WEAR INDICATOR

32 psi (220 kPa , 2.2

kgf/cm )

215/45ZR17 91W

60 psi (420 kPa , 4.2 kgf/cm )

P215/45R17 87V

35 psi (240 kPa , 2.4 kgf/cm )

Main Menu

Table of Contents

s

t

Main Menu

s

t

Main Menu

Main Menu

s

t

Main Menu

Table of Contents

Advertising