HONDA 2005 Accord Coupe - Owner's Manual - Manual (Page 42)

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
To install a LATCH-compatible child
seat:
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the outer
rear seats.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point.
Move the seat belt buckle or
tongue away from the lower
anchors.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
1.
2.
3.
Installing a Child Seat with
LATCH
Installing a Child Seat
40
Rigid type LOWER ANCHORS
BUTTON
Main Menu Table of Contents