HONDA 2005 Accord Coupe - Owner's Manual - Manual (Page 70)

Turning the
switch to the ‘‘ ’’ position turns
on the parking lights, taillights, side-
marker lights, and rear license plate
lights.
Turning the switch to the ‘‘ ’’
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder chime when
you open the driver’s door.
Turn signal
Off
Parking and indicator lights
Headlights on
High beams
Flash high beams
Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
When the light switch is in the
‘‘
’’ or the ‘‘ ’’ position, the
Lights On indicator comes on as a
reminder. This indicator stays on if
you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or LOCK (0)
position.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Push the lever
forward until you hear a click to turn
on the high beams. The blue high
beam indicator will come on (see
page
). Pull the lever back to
return to the low beams.
1.
2.
3.
4.
5.
6.
61
Turn Signal and Headlights
Headlights On
Turn Signal
High Beams
68
Main Menu Table of Contents