HONDA 2005 Pilot - Owner's Manual - Manual (Page 213)

CONTINUED
Pull the light assembly out of the
tailgate.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Pull the bulb straight out of its
socket. Push a new bulb into the
socket until it bottoms. Reinstall
the assembly.
Use a Phillips-head screwdriver to
remove the screw under the lens.
Place a cloth on the middle edge
of a part of the lens on the
passenger’s side. Remove a part of
the lens by carefully prying on its
edge with a small flip tipped
screwdriver.
Reinstall the back-up light cover.
Test the lights to make sure the
new bulb is working.
Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.
Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
1.
4.
5.
3.
2.
4.
5.
6.
3.
Lights
Replacing the High-mount Brake
Light
Ma
int
e
na
nce
211
SCREW
Main Menu Table of Contents