Changing a flat tire – HONDA 2005 Pilot - Owner's Manual User Manual

Page 227

Advertising
background image

Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.

Turn on the hazard warning lights,
and turn the ignition switch to
LOCK (0). Have all the
passengers get out of the vehicle
while you change the tire.

The tools and jack are behind a
cover in the cargo area on the
driver’s side. Remove the cover by
pushing the top of it.

Turn the jack’s end
counterclockwise to loosen it, then
remove the jack and tools.

If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area that is
far away from the traffic lanes.

2.

1.

3.

4.

Changing a Flat Tire

T

a

k

ing
Ca
re

of
th

e

U

ne
x

p

e

c

te

d

225

JACK

SPARE TIRE

TOOLS

COVER

The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.

Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.

Main Menu

Table of Contents

Advertising