HONDA 2005 Pilot - Owner's Manual - Manual (Page 61)

This indicator has two functions:
This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). It will go off if you
have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page
).
If it remains lit after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page
.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II), and when
the ignition switch is turned to
START (III). If it comes on at any
other time, there is a problem with
the ABS. If this happens, have your
vehicle checked at a dealer. With
this on, your vehicle still has normal
braking ability but no anti-lock
brakes. For more information, see
page
.
It comes on when you turn the
ignition switch to ON (II). It is a
reminder to check the parking
brake. A beeper sounds if you try
to drive with the parking brake not
fully released. Driving with the
parking brake not fully released
can damage the brakes and tires. 1.
2.
236
169
75
Parking Brake and Brake System
Indicator
Immobilizer System
Indicator Anti-lock Brake System
(ABS) Indicator
Instrument Panel
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
59
U.S. Canada
Main Menu Table of Contents