HONDA 2005 Insight - Owner's Manual - Manual (Page 138)

Open the hood and remove the
engine oil fill cap. Remove the
black cover under the engine. Remove the oil drain bolt and
washer from the bottom of the
engine. Drain the oil into an
appropriate container.
Do not loosen the smaller bolt
located above the drain bolt. Install a new oil filter according to
the instructions that come with it.
Make sure to clean off any dirt
and dust on the connecting
surface of a new oil filter.
Remove the oil filter, and let the
remaining oil drain. A special
wrench (available from your
dealer) is required. 2. 3. 4.
5.
CONTINUED
Changing the Oil and Filter
Ma
int
e
na
nce
137
WASHER OIL DRAIN BOLT OIL FILTER
Main Menu Table of Contents