HONDA 2005 Insight - Owner's Manual - Manual (Page 53)

To reset this display, turn the
ignition switch to ON (II), the
transmission is in neutral or Park
(CVT), and the parking brake is set.
Use the Trip button to display the
odometer. Then press and hold the
Trip button until the Lifetime Fuel
Mileage Display begins to blink
(approximately five seconds).
Release the Trip button, then press it
again while the display is blinking
and hold it until the display clears to
dashes.
You can temporarily turn off the
Current Fuel Mileage and Fuel
Mileage displays.
To turn them off:
Turn the ignition switch to ON (II),
the transmission is in neutral or
Park (CVT), and the parking
brake is set.
Use the Trip button to select Trip
A, Trip B, or the odometer.
Press and hold the FCD Select
button for approximately three
seconds. The Current Fuel
Mileage display will turn off.
Press and hold the FCD Select
button again. The Fuel Mileage
display for the meter you are
displaying (Trip A, Trip B, or
odometer) will turn off.
Use the Trip button to select
another mileage display.
To turn off the other trip meters,
select the meter with the Trip
button, and hold the FCD select
button.
Although the displays are turned off,
the average fuel mileages continue
to be calculated. The displays will
turn back on when you press and
hold the FCD Select button again.
1.
3.
4.
2.
5.
6.
Gauges
Turning Of f the Mileage Displays
52
Main Menu Table of Contents