HONDA 2005 Insight - Owner's Manual - Manual (Page 169)

Rear tire only:
Use the end of the extension or a
flat-tipped screwdriver to loosen
the two stud fasteners holding the
rear wheel skirt. Pull the rear wheel skirt
downward.
Do not catch your clothes or
hands on the hooks on the rear
fender when you replace the
wheel.
Remove the center cap from the
wheel with the end of the
extension or a flat-tipped
screwdriver.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
1. 2. 3.
4.
Changing a Flat Tire
168
REAR WHEEL SKIRT
STUD
FASTENER
CENTER CAP
Main Menu Table of Contents