Automatic transmission fluid – HONDA 2004 Civic Sedan - Owner's Manual User Manual

Page 152

Advertising
background image

Check the fluid level with the engine
at normal operating temperature.

Park the vehicle on level ground.
Shut off the engine.

Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.

Insert the dipstick all the way into
the transmission securely.

Remove the dipstick and check
the fluid level. It should be
between the upper and lower
marks.

If the level is below the lower
mark, add fluid into the filler hole
to bring it to the upper mark.

Always use Honda ATF-Z1
(Automatic Transmission Fluid). If
it’s not available, you may use a
DEXRON III automatic
transmission fluid as a temporary
replacement. However, continued
use can affect the shift quality.
Have the transmission flushed and
refilled with Honda ATF-Z1 as
soon as it is convenient.

Insert the dipstick all the way back
in the transmission.

The transmission should be drained
and refilled with new fluid according
to the time and distance recommen-
dations in the maintenance schedule.

To thoroughly flush the
transmission, the technician
should drain and refill it with
Honda ATF-Z1, then drive the
vehicle for a short distance. Do
this three times. Then drain and
refill the transmission a final time.

3.

4.

5.

1.

2.

6.

Automatic Transmission Fluid

Maintenance

149

DIPSTICK

UPPER
MARK
LOWER
MARK

Main Menu

Table of Contents

Advertising