Lights – HONDA 2004 Civic Sedan - Owner's Manual User Manual

Page 158

Advertising
background image

Push the electrical connector back
onto the bulb. Make sure it is on
all the way.

Turn on the headlights to test the
new bulb.

(Passenger’s side)
Put the battery back to its original
position, reinstall the bolt in the
stay and tighten it securely.

If you removed the upper part of
the windshield reservoir, put it
back in place. Install the holding
clip. Lock it in place by pushing on
the center.

Reinstall the power steering
reservoir.

(Driver’s side)

Use a flat-tipped screwdriver to
remove the holding clip from the
inner fender, and pull the inner
fender cover back.

Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.

If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left.

Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.

2.

4.

5.

6.

1.

3.

7.

Lights

Maintenance

Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb

155

HOLDING CLIP

Main Menu

Table of Contents

Advertising