HONDA 2004 Civic Sedan - Owner's Manual - Manual (Page 160)

Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Test the lights to make sure the
new bulb is working.
Reinstall the trunk lining. Make
sure it is installed under the edge
of the trunk seal.
Put the fasteners into the holes on
the side of the trunk lining.
Reinstall the screws.
Open the trunk.
Determine which of the two bulbs
is burned out: taillight or back-up
light.
Remove the socket by turning it
one-quarter turn counterclockwise.
Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Test the lights to make sure the
new bulb is working.
4.
5.
6.
1.
2.
3.
4.
5.
6.
7.
8.
Lights
Maintenance
Replacing Rear Bulbs
(in Trunk Lid)
157
BULBS
SOCKETS
Main Menu Table of Contents