Playing the radio – HONDA 2004 Civic Sedan - Owner's Manual User Manual

Page 96

Advertising
background image

The ignition switch must be in
ACCESSORY (I) or ON (II). Turn
the system on by pushing the PWR/
VOL knob or the AM/FM button.
Adjust the volume by turning the
same knob.

The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.

You can use any of five methods to
find radio stations on the selected
band:

the

preset buttons, and

.

Use the TUNE knob to

tune the radio to a desired frequency.
Turn the knob right to tune to a
higher frequency, or left to tune to a

lower frequency.

The SEEK function

searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the

or

side of the

bar, then release it.

The SCAN function

samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan for
a station with a strong signal. When
it finds one, it will stop and play that
station for about five seconds.

If you do nothing, the system will
then scan for the next strong station
and play it for five seconds. When it
plays a station you want to listen to,
press the SCAN button again.

Each preset button can

store one frequency on AM, and two
frequencies on FM.

Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button.
Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 to 3 to store a total
of six stations on AM and twelve
stations on FM.

The preset frequencies will be lost if
your vehicle’s battery goes dead, is
disconnected, or the radio fuse is
removed.

1.

2.

3.

4.

Playing the Radio

Comf ort and Convenience Features

To Play the Radio

To Select a Station

TUNE, SEEK, SCAN,

AUTO SELECT

TUNE

SEEK

SCAN

Preset

93

Main Menu

Table of Contents

Advertising