HONDA 2004 Civic Hybrid - Owner's Manual - Manual (Page 157)

Remove the oil drain bolt and
washer from the bottom of the
engine. Drain the oil into an
appropriate container. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required.
Install a new oil filter according to
the instructions that come with it.
Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:
Refill the engine with the recom-
mended oil.
Engine oil change capacity
(including filter):
Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator light should go out within
5 seconds. If it does not, turn off
the engine and check your work.
Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.
7.
8.
9.
10.
4. 5.
6.
Changing the Oil and Filter
Maintenance 154
DRAIN BOLT
WASHER
OIL FILTER
3.4 US qt (3.2 )
29 lbf·ft (39 N·m , 4.0 kgf·m)
Main Menu Table of Contents