Changing the oil and filter, engine coolant – HONDA 2004 Civic Hybrid - Owner's Manual User Manual

Page 158

Advertising
background image

If Honda antifreeze/coolant is not
available, you may use another
major-brand non-silicate coolant as a
temporary replacement. Make sure it
is a high-quality coolant
recommended for aluminum engines.
Continued use of any non-Honda
coolant can result in corrosion,
causing the cooling system to
malfunction or fail. Have the cooling
system flushed and refilled with
Honda antifreeze/coolant as soon as
possible.

If the coolant level in the reserve
tank is at or below the MIN line, add
coolant to bring it up to the MAX line.
Inspect the cooling system for leaks.
Always use Honda All Season
Antifreeze/Coolant Type 2. This
coolant is pre-mixed with 50 percent
antifreeze and 50 percent water.
Never add straight antifreeze or
plain water.

Turn off the engine, let it sit for
several minutes, then check the oil
level on the dipstick. If necessary,
add more oil.

Put the under-cover back in place
and reinstall the nine holding clips.
Lock the clips securely by pushing
on the center of each clip.

11.

12.

CONTINUED

Maintenance

Adding Engine Coolant

Changing the Oil and Filter, Engine Coolant

155

NOTICE:

RESERVE TANK

Improper disposal of engine

oil can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly. Put it
in a sealed container and take it to a
recycling center. Do not discard it in a
trash bin or dump it on the ground.

Main Menu

Table of Contents

Advertising