Brake system indicator – HONDA 2004 Civic Hybrid - Owner's Manual User Manual

Page 196

Advertising
background image

The brake system indicator
normally comes on when
you turn the ignition switch
ON (II) and as a reminder
to check the parking brake.
It will stay lit if you do not
fully release the parking
brake.

If the brake system indicator comes
on while driving, the brake fluid level
is probably low. Press lightly on the
brake pedal to see if it feels normal.
If it does, check the brake fluid level
the next time you stop at a service
station (see page

).

If the fluid level is low, take your
vehicle to the dealer and have the
brake system inspected for leaks or
worn brake pads.

However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system’s dual circuit

design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down and
you will have to press harder on the
pedal.

Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see

on page

).

If you must drive the vehicle a short
distance in this condition, drive
slowly and carefully.

If the ABS indicator comes on with
this indicator, have the vehicle
inspected by your Honda dealer
immediately.

199

160

On models equipped with ABS

Brake System Indicator

Taking Care of the Unexpected

Emergency

Towing

193

Canada

U.S.

Main Menu

Table of Contents

Advertising